The specialized installation of ceramic tiles in Vanak, Tehran, especially in mixed textures that include old apartments and modern structures, requires polymer-based adhesive materials to prevent surface cracking due to thermal stress. By providing engineered solutions, Makzafari tile and ceramic adhesive has changed the installation process from the traditional method of mortaring to dry and semi-dry systems with low thickness, which results in a 40% reduction in the dead load of the building and the complete elimination of the risk of tile damage in humid environments. Using C2TE grade adhesives and laser levels, our contractors in Venk region ensure millimeter accuracy in the installation of large slabs and porcelain ceramics, which is a necessity in luxury projects in Region 3.
Technical challenges in the foundation of Vanak walls
Our field experience in Venk renovation projects shows that the biggest failure factor in tiling is the mismatch of the substructure with the type of tile. Buildings in this area often face problems such as minor settlements or weak plaster walls that do not have the strength to hold traditional mortar. In old Vanak buildings, the walls have an imperceptible curvature due to the passage of time, and the use of cement-sand mortar intensifies this curvature. At Makzafari, we strengthen the molecular bond between the adhesive and the work surface by using penetrating materials (special primers) before starting the work. Our observations have shown that the use of Makzafari polymer adhesives, in addition to increasing the adhesion up to three times of the usual methods, creates the property of elasticity (flexibility), which prevents the cracks of the straps and the separation of the tile from the wall body during small vibrations or settlement of the building.
Comparative analysis: Mortaring method against Makzafari glue technology
To better understand the functional difference in executive projects, we will check the performance of these two methods in the following table:
Performance index | Traditional mortar system (cement sand) | Mak Zafari tile adhesive system |
Working thickness | 2 to 5 cm (heavy) | 3 to 5 mm (light) |
Final setting time | 48 to 72 hours | 24 hours (high speed) |
moisture resistance | low (susceptible to penetration water) | High (waterproof and antibacterial) |
Ability to install on tiles | Impossible (requires destruction) | Excellent (direct installation on tile) |
Thermal expansion and contraction | High (prone to cracking) | Controlled (resistant to tension) |
Standard installation and leveling process in Makzafari
Tile installation in Venk projects is done by Mak Zafari's technical team during a five-step protocol, the ultimate goal of which is to achieve a completely level and integrated surface. In the first step, the surface of the wall is leveled using laser levels to identify the points that need double foundation. In the second step, using a tiling comb with a special tooth, Makzafari tile adhesive is applied linearly (not pointwise) to remove the trapped air behind the tile. The third step involves the use of clips and wedges (aligners) that keep the edges of the tile perfectly level until the final setting. The fourth step is to control the slope in the toilets, which is done by using light filling materials to prevent water accumulation. Finally, the banding is done with antibacterial powders that are resistant to acid and alkaline detergents used in household cleaning.
Cost management in the luxury renovations of region 3
In Venk's luxury projects, the final cost must not be sacrificed for quality, as any future tiling failure will triple the cost of demolition and rebuilding. Makzafari's strategy in Vanak region is to optimize the use of materials and prevent material waste. We determine the required amount of glue by accurately calculating the size and type of surface and avoid buying excess. The key point in reducing costs is buying directly from the Makzafari brand and eliminating material dealers. We advise employers that paying for quality adhesives and an expert enforcement team is an investment to avoid repair costs for years to come. Due to the fluctuations in the price of materials, projects that use durable materials from the beginning (such as our export adhesives) guarantee the useful life of their building tiling for more than 10 years.
The importance of leak testing and insulation in kitchens
Our expertise is not only in gluing tiles, but when dealing with kitchens with old plumbing, we perform pressure testing and re-insulation before any action. In many Venk projects, the source of moisture behind the tile is rotting pipes and small leaks that cannot be detected without a pressure test until new tile is installed. Mak Zafari team, with full equipment, checks the health of the facilities under construction and, if necessary, performs plumbing corrections before installing tiles. This preventive approach means that after the work is finished, there is no need to worry about the walls getting wet or the moisture infiltrating the adjacent units. The installation of slab tiles (large sizes), which has become very popular in the interior design of Vanak, requires adhesives with high bending strength so that they do not slip or fall on long walls, and Makzafari polymer adhesives with high instant gripping power completely cover this need.